酒钢焦煤仓储系统能力的效验

酒钢公司焦化工序新建4#焦炉项目即将建成投产。4#焦炉的供料工作也迫在眉睫,为了确保4#焦炉顺利投产,保证公司焦化工序的炼焦煤正常供给,我们对现有焦煤料场的储存能力和现有设备装备的生产能力等性能进行了效验。认为用焦煤系统现有的设备、设施,来保证集团公司逐年上升的焦煤用量是无法满足生产需求的。本文简要核算了其卸供料能力。     

Using d-limonene as the non-aromatic and non-chlorinated solvent for the fabrications of high performance polymer light-emitting diodes and field-effect transistors

Aiming to environment protection, green solvents are crucial for commercialization of solution-processed optoelectronic devices. In this work, d-limonene, a natural product, was introduced as the non-aromatic and non-chlorinated solvent for processing of polymer light-emitting diodes (PLEDs) and organic field effect transistors (OFETs). It was found that d-limonene could be a good solvent for a blue-emitting polyfluorene-based random copolymer for PLEDs and an alternating copolymer FBT-Th₄(1,4) with high hole mobility (μ_h) for OFETs. In comparisons to routine solvent-casted films of the two conjugated polymers, the resulting d-limonene-deposited films could show comparable film qualities, based on UV–vis absorption spectra and observations by atomic force microscopy (AFM). With d-limonene as the processing solvent, efficient blue PLEDs with CIE coordinates of (0.16, 0.16), maximum external quantum efficiency of 3.57%, and luminous efficiency of 3.66 cd/A, and OFETs with outstanding μ_h of 1.06 cm² (V s)⁻¹ were demonstrated. Our results suggest that d-limonene would be a promising non-aromatic and non-chlorinated solvent for solution processing of conjugated polymers and molecules for optoelectronic device applications.     

Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation

The present study focuses on experimental investigation of through the thickness displacement and strain field in thin adhesive layer in single sided (unsymmetrical) patch repaired CFRP (carbon fiber reinforced polymer) panel under tensile load. Digital image correlation (DIC) technique is employed to acquire the displacement and strain (longitudinal, peel and shear) field. Experimental determination of shear transfer length based on shear strain field obtained from DIC is introduced to estimate the optimum overlap length which is an essential parameter in patch design for the repair of CFRP structures. Further, DIC experiment with magnified optics is performed to get an insight into complex and localized strain field over thin adhesive layer especially at critical zones leading to damage initiation. The failure mechanism, load displacement behavior, damage initiation and propagation are closely monitored using DIC. The influence of patch edge tapering on strain distribution in adhesive layer is also investigated. The DIC successfully captures the global and localized strain field at critical zones over thin adhesive layer and further helps in monitoring the damage based on strain anomalies. Strains are found to have maximum magnitude at the patch overlap edge and the shear strain level in adhesive layer is higher than the peel strain. Normal tapering increases the peel strain and has negligible influence on shear strain level in adhesive layer. The recommended overlap length is found to be consistent with the recommendation in the literature. Whole field strain pattern and the overlap length obtained from experiment are further compared with the finite element analysis results and they appear to be in good coherence.     

Event-triggered controller design of nonlinear discrete-time networked control systems in T-S fuzzy model

This article is concerned with event-triggered fuzzy control design for a class of discrete-time nonlinear networked control systems (NCSs) with time-varying communication delays. Firstly, a more general mixed event-triggering scheme (ETS) is proposed. Secondly, considering the effects of the ETS and communication delays, based on the T-S fuzzy model scheme and time delay system approach, the original nonlinear NCSs is reformulated as a new event-triggered networked T-S fuzzy systems with interval time-varying delays. Sufficient conditions for uniform ultimately bound (UUB) stability are established in terms of linear matrix inequalities (LMIs). In particular, the quantitative relation between the boundness of the stability region and the triggering parameters are studied in detail. Thirdly, a relative ETS is also provided, which can be seen as a special case of the above proposed mixed ETS. As a difference from the preceding results, sufficient conditions on the existence of desired fuzzy controller are derived to ensure the asymptotic stability of the closed-loop system with reduced communication frequency between sensors and controllers. Moreover, a co-design algorithm for simultaneously determining the gain matrices of the fuzzy controller and the triggering parameters is developed. Finally, two illustrative examples are presented to demonstrate the advantage of the proposed ETS and the effectiveness of the controller design method.     

Conditional Control Charts for Monitoring the Weibull Shape Parameter under Progressively Type II Censored Data

In this paper, (i) we propose new conditional Shewhart‐type control charts for monitoring the shape parameter of the Weibull distribution under a progressively type II censoring strategy, and (ii) we generalize the control charts proposed by Guo and Wang¹ for the progressively type II censoring case. We provide a comparison between these control charts in terms of the out‐of‐control average run length obtained by simulation for both the known and unknown parameter cases. A real example consisting of data from breaking stress of carbon fibers is also presented for illustration and comparison of the proposed control charts. Copyright © 2014 John Wiley & Sons, Ltd.     

An energy-saving nonlinear position control strategy for electro-hydraulic servo systems

The electro-hydraulic servo system (EHSS) demonstrates numerous advantages in size and performance compared to other actuation methods. Oftentimes, its utilization in industrial and machinery settings is limited by its inferior efficiency. In this paper, a nonlinear backstepping control algorithm with an energy-saving approach is proposed for position control in the EHSS. To achieve improved efficiency, two control valves including a proportional directional valve (PDV) and a proportional relief valve (PRV) are used to achieve the control objectives. To design the control algorithm, the state space model equations of the system are transformed to their normal form and the control law through the PDV is designed using a backstepping approach for position tracking. Then, another nonlinear set of laws is derived to achieve energy-saving through the PRV input. This control design method, based on the normal form representation, imposes internal dynamics on the closed-loop system. The stability of the internal dynamics is analyzed in special cases of operation. Experimental results verify that both tracking and energy-saving objectives are satisfied for the closed-loop system.     

Dual-loop self-optimizing robust control of wind power generation with Doubly-Fed Induction Generator

This paper presents a self-optimizing robust control scheme that can maximize the power generation for a variable speed wind turbine with Doubly-Fed Induction Generator (DFIG) operated in Region 2. A dual-loop control structure is proposed to synergize the conversion from aerodynamic power to rotor power and the conversion from rotor power to the electrical power. The outer loop is an Extremum Seeking Control (ESC) based generator torque regulation via the electric power feedback. The ESC can search for the optimal generator torque constant to maximize the rotor power without wind measurement or accurate knowledge of power map. The inner loop is a vector-control based scheme that can both regulate the generator torque requested by the ESC and also maximize the conversion from the rotor power to grid power. An ℋ_∞ controller is synthesized for maximizing, with performance specifications defined based upon the spectrum of the rotor power obtained by the ESC. Also, the controller is designed to be robust against the variations of some generator parameters. The proposed control strategy is validated via simulation study based on the synergy of several software packages including the TurbSim and FAST developed by NREL, Simulink and SimPowerSystems.     

Effect of temperature on mechanical properties of Ti-based metallic glass matrix composite

Systematic mechanical behaviors were investigated in a Ti-based metallic glass matrix (MGM) composite containing the in-situ β-dendrite phase at 100 K–298 K. We found that the yielding strength increased but the plastic strain decreased with a decrease temperature. The sharp ductile to brittle transition occurred at 100 K. The MGM composite exhibits the large work-hardening behavior at 298 K, but all sample display the work-softening behavior below 298 K. The nominal work-hardening parameter was employed to express the dependence of mechanical properties on temperatures including the brittle failure, the work-hardening and work softening behaviors. It may provide a useful way to evaluate the dependence of mechanical properties on temperatures of MGM composite.     

Constrained differential evolution with multiobjective sorting mutation operators for constrained optimization

Differential evolution (DE) is a simple and powerful evolutionary algorithm for global optimization. DE with constraint handling techniques, named constrained differential evolution (CDE), can be used to solve constrained optimization problems (COPs). In existing CDEs, the parents are randomly selected from the current population to produce trial vectors. However, individuals with fitness and diversity information should have more chances to be selected. This study proposes a new CDE framework that uses nondominated sorting mutation operator based on fitness and diversity information, named MS-CDE. In MS-CDE, firstly, the fitness of each individual in the population is calculated according to the current population situation. Secondly, individuals in the current population are ranked according to their fitness and diversity contribution. Lastly, parents in the mutation operators are selected in proportion to their rankings based on fitness and diversity. Thus, promising individuals with better fitness and diversity are more likely to be selected as parents. The MS-CDE framework can be applied to most CDE variants. In this study, the framework is applied to two popular representative CDE variants, (μ + λ)-CDE and ECHT-DE. Experiment results on 24 benchmark functions from CEC’2006 and 18 benchmark functions from CEC’2010 show that the proposed framework is an effective approach to enhance the performance of CDE algorithms.     

Predicting the tensile creep of concrete

Over a four year period, six phases of testing were performed to observe the influence of age at loading, applied stress level, mix composition and relative humidity on the tensile creep of concrete. From these investigations it was possible to develop a model which allowed the prediction of tensile creep based on a knowledge of the compressive strength of the concrete (determined at the age of loading), the applied stress level and the relative humidity. Subsequently, this model was validated using the results from three independent investigations. Compressive creep as well as tensile creep was also obtained. This allowed a comparison of compressive creep with tensile creep and illustrated that on the basis of equal stresses, tensile creep is on average between 2 and 3 times greater than compressive creep (the maximum ratio is in excess of 8). For this investigation, however, on the basis of stress/strength ratio the difference between tensile and compressive creep is less significant. Considering a simply supported flexural reinforced concrete element, the investigation suggests that it is unwise to consider actual compressive creep equal to actual tensile creep as is often the case in design practice.